Mass

Air Flow

Indiana Standards Laboratory offers ISO/IEC-17025 accredited calibration of anemometers, balometers. We calibrate using standards traceable to a National Metrological Institute such as NIST(US) for various manufacturers’ instruments including but not limited to: Extech, Shortridge, Alnor, and TSI.

Air Speed Velocity (Anemometers, Pitot Tubes)
  • (1.5 to 30) m/s
Air Flow
  • (10 to 375) SCFM
  • (200 to 2000) SCFM

Gas Flow

Indiana Standards Laboratory offers ISO/IEC-17025 accredited calibration of mass flowmeters and rotameters. We calibrate using standards traceable to a National Metrological Institute such as NIST(US) for various manufacturers’ instruments including but not limited to: Alnor, Aalborg, Omega, Brooks, Key Instruments, MADA, and TSI.

Gas Flow (Mass & Volume Flow Meters)
  •  (0.1 to 400) SLPM, (0 to 100) SCCM
Gas Flow (Balometers, Volume Flow Meters)
  • (200 to 2000) SCFM

Liquid Flow

Indiana Standards Laboratory offers ISO/IEC-17025 accredited calibration of liquid flowmeters using standards traceable to a National Metrological Institute such as NIST(US).

Liquid Flow
  •  (1 to 226) SLPM, (0.1 to 60) lph

Force

Indiana Standards Laboratory offers ISO/IEC-17025 accredited calibration of load cells, force gauges, and dynamometers. We calibrate using standards traceable to a National Metrological Institute such as NIST(US) for various manufacturers’ instruments including but not limited to: Dillon, Interface Force, Rainhart, Mark-10, Ametek, Chatillon, and Honeywell Sensotec.

Force- Compression & Tension
  • (1 to 100,000) lbf

Mass

Indiana Standards Laboratory offers ISO/IEC-17025 accredited calibration of mass. Indiana Standards Laboratory uses mass comparators to perform a direct comparison of your mass to a traceable mass standard using the NIST procedure SOP 7.  

Weights
  • 0 g to 50 kg

Pressure

Indiana Standards Laboratory offers ISO/IEC-17025 accredited calibration of pressure. Using digital pressure calibrators and precision deadweight testers Indiana Standards Laboratory can calibrate a wide range of pressure gauges, pressure calibrators, pressure test gauges and pressure transducers. We calibrate using standards that are traceable to a National Metrological Institute such as NIST(US) for various manufacturers’ instruments including but not limited to: Fluke, Crystal, Ametek, US Gauge, Wika, Setra, Sensotec, Dwyer, and Druck.

Vacuum
  • (0.001 to 10) torr
Pressure-Pneumatic Gage and Absolute Gage Only
  • (0.2 to 1000) psia
Pressure, Hydraulic Gage
  • (1000 to 15000) psi
Manometers
  • (0 to 20) inH2O

Scales

Indiana Standards Laboratory offers ISO/IEC-17025 accredited calibration of scales using standards traceable to a National Metrological Institute such as NIST(US).

Balances & Scales
  • 0 g to 907 kg

Torque

Indiana Standards Laboratory offers ISO/IEC-17025 accredited calibration of torque wrenches, torque testers, torque analyzers, and torque watches using standards traceable to a National Metrological Institute such NIST(US).

Torque Analyzers
  • (0.1 to 2000) lbf∙ft
Torque Wrenches
  • (0.5 to 2000) lbf∙ft
Torque Watches
  • (0.5 to 215) ozf∙in

Viscosity

Indiana Standards Laboratory offers ISO/IEC-17025 accredited calibration of viscometers and viscosity cups using standards traceable to a National Metrological Institute such as NIST(US).

Viscometers
  • (<10 to 100,000) cP
Viscosity Cups
  • (<10 to 1000) cSt